vehicle horn/Snail Horn/Car Horn LD711
1. Horizontal installation
2. Do not adjust the angle of the connecting piece and the bracket, or bend the connecting piece
3. The installation torque of the horn bracket should be within the range of (11NM, 18NM)
4. The horn and its bracket should be installed on a sufficiently solid surface to avoid resonance between the horn and the entire workshop
5. The continuous sound of each horn should not exceed 2 seconds, otherwise it will cause the coil to burn
Cut off the power and install the snail horn in a horizontal direction with a tool. The horn must be down and toward the front of the vehicle to prevent water from directly flowing into the mouth. The sound from the horn should radiate freely. Sometimes it is necessary to install a recharger in a suitable position on the car body. You can go to the auto repair shop to install the horn.
After installation, confirm whether the screw cap for fixing is tightened. If it is loose, tighten it immediately.